2200 Positioning Belt with D-Rings on each hip. Designed for positioning
work or used in conjunction with a fall-arrest harness. Tongue buckle and
brass grommets for comfortable adjustment.
2400 Positioning Belt with full length 4 in. Pad and D-Rings on
each hip. Designed for positioning work or used in conjunction with a fall-arrest
harness. Tongue buckle and brass grommets for comfortable adjustment.
Belt Sizes: S = 32" - 40", M = 36" - 44", L
= 40" - 48", XL = 44" - 52"
Measure over clothing when selecting sizes
Custom sizes available
Alta® Shock
Absorber
2875 Shock Abosrber Pack constructed with (2905) double locking
snap hook. Designed for fall-arrest only with an approved connector.
2876 Same as above with D-ring attached to eye.
IMPORTANT! The ALTA® Shock Absorber Pack is
designed to elongate up to 3.5 feet in a fall. Be sure to add 3 1/2 ft (42
inches) into the total fall distance calculation.
Alta® Lanyards
& Lifelines
2704 Lanyard - constructed of 1/2" dia. nylon rope. Designed for positioning and/or fall-arrest. Clear heat shrink
tubing covers the splicing, providing protection and easy inspection. Available in 4 ft and 6 ft.; call for custom length.
2804 Lanyard - constructed with 1" wide nylon sling web. Designed for positioning and/or fall-arrest purposes.
Available in 4 ft and 6 ft.; call for custom length.
2806-A - 6' Adjustable Web Lanyard 1" sling web lanyard with
adjustable link to shorten lanyard; maximum length 6'.
2825 Rope Lanyard with Shock Absorber Pack constructed of 1/2" dia. nylon rope and a shock absorber pack.
Designed for fall arrest only. Clear heat shrink tubing covers the splicing, providing protection and easy inspection.
Available in 4 ft and 6 ft.
2850 Web Lanyard with Shock Absorber Pack constructed of 1" nylon web and a shock absorber pack.
Designed for fall-arrest only. Available in 4 ft and 6 ft.
2860 - 6' "y" Lanyard with Shock Absorber Pack provides
positive connection for 100% tie off. Two web lanyards attached to a shock
absorber unit to allow the worker to move about with at least one lanyard
attached.
2975-50 - 50' Lifeline constructed of 5/8" blended rope.
Designed for use in a fall-arrest system. Clear heat shrink tubing covers
the splicing, providing protection and easy inspection. (Other
lengths available.)